AirLink ap411w Benutzerhandbuch
11
Step 10
Select to enable or disable WEP encryption and click Next. If you already have
WEP encryption enabled for your existing wireless network, you must enter the identical
encryption settings here.
encryption settings here.
Step 11
Click Reboot to save and apply the settings.
Note: Once you have configured the settings, you’ll need to change the TCP/IP settings
back to dynamic IP. Follow steps 1 - 3 of this section and change the TCP/IP properties
back to “Obtain an IP address automatically.” Restart your computer afterwards.
For further configuration including WPA encryption, please use the Advanced Setup
link.
back to dynamic IP. Follow steps 1 - 3 of this section and change the TCP/IP properties
back to “Obtain an IP address automatically.” Restart your computer afterwards.
For further configuration including WPA encryption, please use the Advanced Setup
link.