Leica V-Lux 20 Betriebsanweisung
90
91
For [REC] menu setting procedures (→18)
Using the [REC] menu
(Continued)
●
Slow-moving subject
●
Fast-moving subject
ISO Sensitivity 200
(Shutter speed 1/30 s)
ISO Sensitivity 800
(Shutter speed 1/125 s)
●
Shutter speed and ISO Sensitivity are displayed in the screen for a few seconds after
recording.
recording.
●
If interference becomes noticeable, we recommend reducing the setting, or setting
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
●
Blurring may occur depending on brightness, size, position, and speed of movement of
the subject (e.g. if subject is too small, is on edge of picture, or starts moving as soon
as shutter button is pressed).
the subject (e.g. if subject is too small, is on edge of picture, or starts moving as soon
as shutter button is pressed).
●
Scope of flash recording (→44)
[SENSITIVITY]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
We recommend higher settings to take clear pictures in darker locations.
■
Recording Mode:
■
Settings: [AUTO] / [80] / [100] / [200] / [400] / [800] / [1600]
Setting guide
[SENSITIVITY]
[80]
[1600]
Location
(recommended)
Bright
(outdoors)
Dark
Shutter speed
Slow
Fast
Interference
Low
High
●
[AUTO] is automatically set in a range up to 400 (1000 when flash is used) based on
subject movement and brightness.
subject movement and brightness.
●
Scope of flash recording (→44)
●
Cannot be set when [INTELLIGENT ISO] is used (
is displayed)
●
If interference becomes noticeable, we recommend reducing the setting, or setting
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
[WHITE BALANCE]
Adjust coloring to suit light source if colors otherwise appear unnatural.
■
Recording Mode:
■
Settings: [AWB] (automatic) / (outdoor, clear sky) /
(outdoor, cloudy sky) /
(outdoor, shade) /
(Incandescent lighting) /
(uses value set in
) /
(set manually)
●
[AWB] operational range:
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
1000K
Cloudy sky (rain)
Shade
TV screen
Incandescent lighting
Sunset/sunrise
Candlelight
Sunlight
White fluorescent lighting
Blue sky
●
Pictures may appear red or blue if out of
range. This function may also not work
correctly even within range if there are many
light sources present.
range. This function may also not work
correctly even within range if there are many
light sources present.
●
We recommend setting to [AWB] or [
]
when under fluorescent lighting.
■
White Balance fine adjustment (excluding [AWB])
White Balance settings can be individually fine tuned if colors
still do not appear as anticipated.
White Balance settings can be individually fine tuned if colors
still do not appear as anticipated.
Press ▲ several times until [WB ADJUST.] is displayed.
Adjust with ► if reds are strong, adjust with ◄ if blues are
Adjust with ► if reds are strong, adjust with ◄ if blues are
strong.
Press [MENU/SET].
• Settings are remembered even if power is turned off.
Changes to red (blue) when
making fine adjustment
• Settings remain applied when using flash.
• Fine adjustments cannot be made when [COLOR EFFECT] (→97) is set to [B/W],
[SEPIA], [COOL], or [WARM].
■
Setting White Balance manually (
)
Select
and press [MENU/SET].
Point the camera towards a white object (e.g. paper)
and press [MENU/SET].
Press [MENU/SET].
White Balance is set to
.
• Making this setting will reset White Balance fine
adjustment.
Only takes pictures of white
objects within frame (step )
[MENU/SET]
• Even if the camera’s power is OFF, the set White Balance is remembered.
• It may not be possible to set the correct White Balance if subjects are too bright or too
dark. In this case, adjust the brightness and try to set the White Balance again.