ONKYO CR-N1 Gebrauchsanleitung
55
Using USB
Enabling digital CD audio
In order to listen to CDs in your computer’s
CD-ROM drive via USB, you must enable digi-
tal CD audio for your CD-ROM drive as fol-
lows.
CD-ROM drive via USB, you must enable digi-
tal CD audio for your CD-ROM drive as fol-
lows.
Windows 98/98SE
1
Open the Multimedia control panel and
click the CD Music tab.
click the CD Music tab.
2
Select the “Default CD-ROM drive for
playing CD music.”
playing CD music.”
3
Turn on “Enable digital CD audio for this
CD-ROM device.”
CD-ROM device.”
4
Click OK to close the control panel.
Windows 2000/Me
1
Open the System control panel.
2
If you are using Windows 2000, click the
Hardware tab, and then click the Device
Manager. If you are using Windows Me,
click the Device manager tab.
Hardware tab, and then click the Device
Manager. If you are using Windows Me,
click the Device manager tab.
3
Select your CD-ROM drive from the list,
and then click the Properties button.
and then click the Properties button.
4
Click the Properties tab, and then turn
on “Enable digital CD audio for this
CD-ROM device.”
on “Enable digital CD audio for this
CD-ROM device.”
5
Click OK to close the window, and then
close the System control panel.
Note that if the CR-N1 has not been rec-
ognized successfully by your PC, or your
CD-ROM drive does not support digital
audio output, you will not be able to turn
on “Enable digital CD audio for this
CD-ROM device.”
close the System control panel.
Note that if the CR-N1 has not been rec-
ognized successfully by your PC, or your
CD-ROM drive does not support digital
audio output, you will not be able to turn
on “Enable digital CD audio for this
CD-ROM device.”