ONKYO TX-SA806 Betriebsanweisung

44

If you connect a video component to HDMI IN, you 
must assign that input to an input selector. For example, 
if you connect your DVD player to HDMI IN 1, you 
must assign HDMI IN 1 to the DVD input selector.

If you’ve connected your TV to the AV receiver/AV 
amplifier with an HDMI cable, you can set the AV 
receiver/AV amplifier so that composite video, S-Video, 
and component video sources are upconverted* and out-
put by the HDMI OUT. You can set this for each input 
selector by selecting the “- - - - -” option.

Notes:
• For composite video, S-Video, and component video 

upconversion for the HDMI OUT, the “Monitor Out” 
setting must be set to “HDMI” (see page 41), and the 
HDMI Input setting must be set to “- - - - -”. See 
page 23 for more information on video signal flow and 
upconversion.

• When an HDMI IN is assigned to an input selector as 

explained here, the digital audio input for that input 
selector is automatically set to the same HDMI IN. 
See “Digital Input Setup” on page 46.

• On the TX-SR806, the TUNER input selector cannot 

be assigned and is fixed at the “- - - - -” option.

• This procedure can also be performed on the AV 

receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input Assign”, 
and then press [ENTER].
The “Input Assign” menu appears.

q]/[w] but-

tons to select “1. HDMI Input”, 
and then press [ENTER].
The “HDMI Input” menu appears.

Composite video, S-Video, 

component video

Composite video, S-Video, 

component video

HDMI

HDMI

q]/[w] but-

e]/

r] buttons to select:

Select the HDMI IN to which 
the video component has 
been connected.

- - - - -: Output composite video, 

S-Video, and component 
video sources from the HDMI 
OUT. The video output signal 
from the HDMI OUT is the 
one configured in “Compo-
nent Video Setup” (see 
page 45).

Each HDMI IN cannot be assigned to 
more than one input selector. When 
HDMI1 - HDMI5 have already been 
assigned, you must set first any unused 
input selectors to “- - - - -” or you will 
be unable to assign HDMI1 - HDMI5 
to input selector.

Press the [SETUP] button.
The setup menu closes.

TX-SR806_En.book  Page 44  Monday, August 4, 2008  10:25 AM