Austin Hughes Electronics rp-1020qd Betriebsanweisung

The unit is equipped with 4 alarm sensor inputs. If any alarm is activated:

■   

the built-in buzzer will be activated.                                                                                                                               

■   

the quad will switch the corresponding channel indicator LED to blinking mode. 

■

   a warning message depending on different models will be displayed as follows: 

Quad output channel (#4)

LIVE output channel (#5)

Blinking Alarm & Title message on the 
activated channel in quad screen

Full screen display of the activated channel. 
Also display a blinking Alarm message

Alarm

Alarm

Above mentioned alarm can be cleared by: If the device is operated under Security Lock ON mode, Push Lock button for 
2 seconds to disable the function then push any button in the front panel.

Loss of video at any input is automatically detected by the device. The device will:

■   

Activate the built-in buzzer.

■   

Switch the corresponding channel indicator LED to blinking mode.

■   

Display warning message on quad screen:

Quad output channel (#4)

Blinking Video Loss & Title message
on the activated channel in quad 
screen

Video loss

■   

The warning message and the buzzer can be cleared 

by pushing Lock button (#2) for more than 4 seconds if the 
device is operated under Security lock On mode, or pushing 
any button on the front panel if the device is operated under 
Security lock OFF mode.

P.30