Omnitron iConverter GX/X 8550-01 Merkblatt
Produktcode
8550-01
iConverter
iConverter
®
Two-port 1000BASE-X fiber switch and media converter
■
Two Gigabit Ethernet fiber ports
■
Supports multimode, single-mode, and single-fiber with
■
SC, MT-RJ and LC connectors
Features Port VLAN, Tag VLAN, Port Access Control
■
and MIB statistics
Full-Duplex auto-negotiation or manual negotiation
■
Two 10/100 Ethernet backplane ports for connectivity to
■
adjacent iConverter modules
Supports 1000BASE-X (IEEE 802.3z)
■
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
GX/X
1000X to 1000X Gigabit Ethernet Switch and Media Converter
The iConverter GX/X managed two-port Gigabit Ethernet switch
and media converter is a member of the modular iConverter
product family. The GX/X provides single-mode to multimode
fiber conversion for extending network distances up to 80km
by connecting multimode fiber network devices over single-
mode fiber cabling. The GX/X also functions as a repeater,
regenerating and re-timing the fiber optic signal. Multiple GX/X
can be cascaded to extend total network distances.
The iConverter GX/X supports the IEEE 802.1Q and 802.1p
standards, and the 802.1Q Tag VLAN packet tagging and
untagging protocol.
Whether deployed at the Customer Premises (CP) or at the
Central Office (CO), the VLAN-based technology enables
Service Providers to offer to their customers secure Ethernet
Virtual Connections which are isolated from other customer’s
data as well as from the Service Provider’s management traffic.
It also enables the Service Provider to deploy edge equipment
at the Customer Premises while maintaining secure separation
of Service Provider network management and customer data
traffic.
The GX/X features Port VLAN, which allows complete control
of traffic flow between both fiber ports and chassis backplane
ports on a module and Port Access Control, which facilitates
enabling and disabling of individual ports. The GX/X also
supports reporting of MIB statistics. Statistics are available for
32 variables per port, reporting a wide range of real-time packet
statistics to provide performance and operational monitoring.
iConverter GX/X models are available with multimode, single-
mode, and single-fiber options. They support SC, MT-RJ, and
LC connectors. The iConverter GX/X features two 10/100
Ethernet backplane ports to provide connectivity to adjacent
modules for network expansion and for in-band connectivity
to an iConverter Network Management Module.
The GX/X features user-selectable Link Propagate, Link
Segment, Remote Fault Detection and Symmetrical Fault
Detection modes to facilitate quick fault detection, isolation
and reporting.
iConverter GX/X modules are hot-swappable and can be
iConverter GX/X modules are hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. They can
also be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.
Key Features