Samsung av-r700 Gebrauchsanleitung

50

49

Symptom

Check Remedy

There is no sound from rear

center speaker 

•

Is the rear center speaker connected

properly?

•

Is the SB SPK (Rear Center) selected

to NONE in Speaker Setup?

•

Is Surround Mode selected to EX/ES

•

Refer to page 9~10 to connect it properly.

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Refer to page 35~36 to select Surround

Mode to EX/ES.

Can't select EX/ES Mode.

•

Is SB SPK (Rear Center) selected to

NONE in Speaker Setup?

•

Is the input signal selected properly?

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Use 5.1 channel external component.

Can't select Dolby Pro Logic

llx Mode.

•

Is the input signal selected properly?

•

Select 2 channel Dolby Digital, PCM, and

Analog input signal.

There is no sound when
playing DTS encoded DVD
and CD.

•

Is analog input selected?

•

Check whether digital external component

is properly connected and refer to page 19
to select the digital input.

Can't select NEO:6 Mode.

•

Is the input signal selected properly?

•

Use PCM and Analog input signal.

Product Protection Function 

DC Protection Circuit

• If DC is output from output connector, DC protection circuit

works automatically to protect the speaker.

Heat Protection

• Protection function works if the main unit is overheated or power

transformer is overheated.
appears in the display when the “

” function

works.
- If speaker terminal is shorted 
- If speaker cord is shorted 
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.

•

If PROTECTION appears on the display,
check whether speaker terminal is shorted
and then turn on the device.

√√

œœ

Symptom

Check Remedy

Can't turn it on.

It does not work when the
button is pressed.

Sound is not produced.

Picture does not appear when
the function is selected.

•

Is the power code plugged into the outlet?

•

Isn’t the air too dry to cause

electrostatics?

•

Are the speaker and external

component connected properly?

•

Does the Mute function work?

•

Is the volume set to minimum?

•

Is the speaker setup selected to

NONE?

•

Isn’t the external component connected

properly?

•

Connect the power plug to the outlet.

•

Disconnect the power plug and connect it

again.

•

Properly connect it.

•

Properly connect it.

•

Press Mute button to cancel the function.

•

Adjust the volume.

•

Refer to page 17~18 to select LARGE,

SMALL or YES.

There is no sound from

center speaker 

•

Is the center speaker connected properly?

•

Is C.SPK (Center) selected to NONE in

Speaker Setup?

•

Is the Surround Mode selected to Stereo?

•

Refer to page 9~10 to connect it properly.

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Refer to page 27~38 to select other

Surround Mode.

Remote controller does not
work.

There is no sound from rear

speaker.

The sound from each device
is changed during stereo
playback.

Can't receive broadcasting.

•

Is AM or FM antenna connected

properly?

•

Are the batteries exhausted?

•

Is the distance between remote

control and main unit proper?

•

Is the rear speaker connected

properly?

•

Is  S.SPK (Rear) set to NONE in

Speaker Setup?

•

Is Surround Mode selected to Stereo?

•

Refer to page 17~18 to connect it properly.

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Refer to page 27~38 to select other

Surround Mode.

•

Replace with new batteries.

•

Operate at close distance.

•

Properly connect the antenna.

•

If the input strength of antenna connector is

weak, install the FM antenna at the place
with good reception.

•

Is the left/right speaker or left/right

input/output code connected
properly?

•

Check the left/right channel and properly

connect it.