Samsung HT-TP12 Gebrauchsanleitung

52

51

To tune in to a preset station, press                on the 
remote control to select a channel.

•

Refer to Step 2 on page 51 to
automatically or manually tune in
to a station.

•

Each time the button is pressed,
the band switches between 
"

FM".

•

“PRGM” flashes in the display. 

Press            to
select "89.10".

Press the 

button and select
the FM band.

•

Press the 

button before

‘PRGM’ disappears from the display.

•

‘PRGM’ disappears from the display and
the station is stored in memory.

•

You can select between 1 and
15.

Press the 

button.

Press the 

button

again.

To preset another
station, repeat
steps 2 to 5.

Press
to select preset
number.

15 FM stations

• 

Frequency Modulation

• 

The selection toggles back and
forth between "FM" each time
the 

button is pressed.

Press 

button.

Select a broadcast
station.

Press the 

(   )

button to select

PRESET and then press
button to select the preset station.

Press the 

button to select the
desired band (FM).

Press the 

(   ) button

to select "MANUAL" and

then press and hold                   button to
automatically search the band.

Press 

(   ) to select

MANUAL and then briefly

press

to tune in to a lower or

higher frequency.

•

Each time the button is pressed, the sound switches between "STEREO" and "MONO".

•

In a poor reception area, select MONO for a clear, interference-free broadcast.

Press 

button to listen in Mono/Stereo. 

(This applies only when listening to an FM station.)

When                is pressed, a
preset broadcast station is
selected.

Press and hold                 to
automatically search for
active broadcasting stations.

Briefly press                 to
increase or decrease the
frequency incrementally.

You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual
tuning operation.