Samsung ln-40a540 Betriebsanweisung

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG 

(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by 

connecting a USB drive to the USB port located on your TV. 
1.   Insert a USB drive containing the firmware upgrade into the WISELINK port 

on the side of the TV.

2.   Press the MENU button to display the menu. 

Press the ▲ or ▼ button to select “Setup”, then press the 

ENTER   button.

3.   Press the ▲ or ▼ button to select “SW Upgrade”, then press the ENTER   

button.

4.   Press the ENTER   button. 

The message “Scanning for USB... It may take up to 30 seconds.” is 

displayed.

5.   The message “Upgrade version XXXX to version XXXX? The system will be 

reset after upgrade.” is displayed.  

Press the ◄ or ► to select the “OK”, then press the 

ENTER   button.

 

 Please be careful to not disconnect the power or remove the USB drive while 

upgrades are being applied. The TV will turn off and turn on automatically 

after completing the firmware upgrade. Please check the firmware version 

after the upgrades are complete. When software is upgraded, video and 

audio settings you have made will return to their default (factory) settings. We 

recommend you write down your settings so that you can easily reset them 

after the upgrade.

Setup

Energy Saving 

: Off

PIP

Software Upgrade

Scanning for USB.....
It may take up to 30 seconds.

Software Upgrade

Upgrade version XXXX to version XXXX? The system will  
be reset after upgrade.

OK

Cancel

HDMI IN3

HDMI IN3

BN68-01392J-ENG.indb   60

2008-03-19   ¿ÀÈÄ 2:31:10