Polycom IP 300 Veröffentlichungshinweis
Release Notes - SIP Application
Changes
Page 16
Copyright © 2006 Polycom, Inc.
2.9.4 Configuration File Parameter Changes
.cfg File
Action
Parameter
Description
ipmid
removed
All parameters
The contents of this file have been
added to sip.cfg and this file is no
longer used.
added to sip.cfg and this file is no
longer used.
sip
added
All “ipmid.cfg” parameters
The contents of the old ipmid.cfg file
have been added to sip.cfg.
have been added to sip.cfg.
sip
added
call.callsPerLineKey
The number of calls or conferences
which may be active or on hold per
line key on the phone.
For the IP 600, range is 1 to 24 and
default is 24.
For all other phones, range is 1 to 8
and default is 8.
which may be active or on hold per
line key on the phone.
For the IP 600, range is 1 to 24 and
default is 24.
For all other phones, range is 1 to 8
and default is 8.
sip
changed
voIpProt.SIP.useRFC2543hold
Changed the default value to "0" (it
used to be “1”) which means that RFC
3261-style hold signalling is the
default.
used to be “1”) which means that RFC
3261-style hold signalling is the
default.
sip changed
voice.gain.rx.analog.chassis.IP300
voice.gain.rx.analog.ringer.IP300
voice.gain.rx.analog.ringer.IP300
Changed name to
voice.gain.rx.analog.chassis.IP_300
voice.gain.rx.analog.ringer.IP_300
voice.gain.rx.analog.chassis.IP_300
voice.gain.rx.analog.ringer.IP_300
sip
changed
call.shared.oneTouchResume
This applies to SoundStation IP 4000
phones only in this build. For all other
phones, one-touch resume is the
default. In order to view call
information about a call on hold on
another phone with a shared line –
press and hold down the line key for a
few seconds.
phones only in this build. For all other
phones, one-touch resume is the
default. In order to view call
information about a call on hold on
another phone with a shared line –
press and hold down the line key for a
few seconds.
sip
changed
ind.gi.IP_600.x…
Changed values used for locating line
key labels. Update this whole section.
key labels. Update this whole section.
sip
removed
ind.pattern.8.step.3 to 6
An incoming call causes the LED to
flash continuously at 2Hz rather than
flash intermittently.
flash continuously at 2Hz rather than
flash intermittently.
sip
removed
all .obs parameters from logging
section
section
These parameters are no longer
used.
used.
phone1
added
reg.x.ringType
The ring type for each registration can
be configured. Range is 1 to 22.
Note: ring type number 1 is “silent
ring”.
be configured. Range is 1 to 22.
Note: ring type number 1 is “silent
ring”.
phone1
added
reg.x.lineKeys
The number of line keys on the phone
to be associated with registration ‘x’.
Range is 1 to the maximum number
of line keys on the phone (IP 300 = 2,
IP 500 = 3, IP 600 = 6, IP 4000 = 1).
Default is 1.
to be associated with registration ‘x’.
Range is 1 to the maximum number
of line keys on the phone (IP 300 = 2,
IP 500 = 3, IP 600 = 6, IP 4000 = 1).
Default is 1.
phone1 added
reg.x.callsPerLineKey
The
number of calls or conferences
which may be active or on hold per
line key for a specific registration on
the phone. This will override the
global call.callsPerLineKey parameter
in sip.cfg. Same range and defaults
as call.callsPerLineKey above.
line key for a specific registration on
the phone. This will override the
global call.callsPerLineKey parameter
in sip.cfg. Same range and defaults
as call.callsPerLineKey above.
000000000000
removed
ipmid.cfg from list of
CONFIG_FILES
CONFIG_FILES
The ipmid.cfg file is no longer used.