Samsung sp-p4251 Betriebsanweisung
13
How to Adjust Mounting Angle
Factory default
The wall mount bracket is delivered separately. Please tighten the captive screw in the
direction of the arrow after assembling the bracket.
direction of the arrow after assembling the bracket.
1
Secure the PDP to the wall mount
bracket. (Please refer to the following
instructions.)
bracket. (Please refer to the following
instructions.)
2
Set the angle by pulling the upper end of
the PDP attached to bracket in the direction
of the arrow.
the PDP attached to bracket in the direction
of the arrow.
3
The angle can be adjusted from 0° to 15°
by ±2°.
by ±2°.
Changing the angle