Dialogic TR1034+uP2C-R HALF 901-004-01 Datenbogen
Produktcode
901-004-01
Dialogic
®
Brooktrout
®
TR1034 Fax Boards
Datasheet
2
The Brooktrout TR1034 features sophisticated hardware that operates with low power consumption. Onboard fax protocol processing can
reduce a fax server’s CPU utilization and improve overall system performance. Up to four TR1034 fax boards can operate concurrently in
a single server, providing scalability to address changing communications needs.
reduce a fax server’s CPU utilization and improve overall system performance. Up to four TR1034 fax boards can operate concurrently in
a single server, providing scalability to address changing communications needs.
Note: Dialogic
®
Brooktrout
®
TR1034 Fax Boards are not
compatible with Dialogic
®
Brooktrout
®
TruFax Fax Boards in the same chassis.
The Brooktrout TR1034 sends and receives TDM or IP faxes (where supported) up to 33.6 kbps, based on the V.34 fax standard (the DID/
Combo model receives faxes up to V.17 and sends up to 33.6 kbps). Not only can the TR1034 process fax at twice the speed of 14.4 kbps fax
boards, it also supports V.8 fast handshaking and advanced compression, which can cut call setup and session-management time by one third.
A document that can be faxed in one minute with a 14.4 kbps intelligent fax board can be sent in less than 30 seconds with the Brooktrout
TR1034. This can translate into significant savings on long distance toll charges.
Combo model receives faxes up to V.17 and sends up to 33.6 kbps). Not only can the TR1034 process fax at twice the speed of 14.4 kbps fax
boards, it also supports V.8 fast handshaking and advanced compression, which can cut call setup and session-management time by one third.
A document that can be faxed in one minute with a 14.4 kbps intelligent fax board can be sent in less than 30 seconds with the Brooktrout
TR1034. This can translate into significant savings on long distance toll charges.
The Brooktrout TR1034 is available in a variety of interface types and channel densities as shown in Table 1. In addition, the Dialogic
®
Technology Expansion Capability (TEC) upgrade allows increased density on Brooktrout TR1034 T1/E1 models. See the
technology brief for more information.
Interface
Channels
Analog
2, 4, and 8
DID/Combo
2 and 4
BRI
2 and 4
T1/PRI/FoIP
4, 8,16, and 24
E1/PRI/FoIP
8,10, 16, 20, and 30
Software-selectable T1/E1
4, 8, 16, 24, and 30
High Density T1/PRI/FoIP
48 (IP and TDM V.17, V.34) and 96 (TDM V.17 only)
High Density E1/PRI/FoIP
60 (IP and TDM V.17, V.34) and 90 (TDM V.17 only)
Table 1. Board Types and Channel Densities for the Dialogic
®
Brooktrout
®
TR1034 Fax Boards
To enable highly reliable faxing over VoIP networks, the Brooktrout TR1034 retains the field-proven Dialogic
®
Brooktrout
®
T.30 fax data stream
within a T.38-based fax over IP transmission. The T.38 stack has also undergone significant interoperability testing with other IP vendors. This
successfully tested interoperability provides flexibility and reliability when the Brooktrout TR1034 is deployed into VoIP networks.
successfully tested interoperability provides flexibility and reliability when the Brooktrout TR1034 is deployed into VoIP networks.
For TDM, the Brooktrout TR1034 implements multinational ISDN protocols, as well as most supplementary services and many signaling
protocols. These features provide application compatibility with most PBXs from major vendors and allow worldwide deployment of fax servers
with Brooktrout TR1034.
protocols. These features provide application compatibility with most PBXs from major vendors and allow worldwide deployment of fax servers
with Brooktrout TR1034.