Copystar cs-1635 Betriebsanweisung

The Job Accounting allows you to manage the number of copies for each 
department through the setting of the Department ID Code separately for 
each department.

This copier has the following features available through the Department ID 
Code.

•

A maximum of 100 Sections can be managed.

•

ID Codes can be set from 0 to 99999999 for a maximum of 8 digits.

•

The accumulated totals of pages copied according to ID Code can be 
printed out on paper.

The factory default setting is indicated by an asterisk (*).

Follow the procedure listed below to operate the Job Accounting.

Press both of [Exposure Adjustment] for 3 
seconds while pressing on [Job 
Accounting]. Job Accounting: will be 
displayed.

Press 

U or V and select each of the mode displays.

Refer to each of the following setting procedures and make the 

settings.

Each of the Modes can be selected by pressing the numeric keys.

In order to carry out Job Accounting, set this to on 
(set), Set this to oFF (no setting) when Department 
Management is not needed.

On: Set
Off: No Setting*

Registers the Department ID Code up to the line. Up 
to 100 sections can be registered as Department ID 
Codes.

Deletes Department ID Codes that will not be used 
anymore.

Yes: Delete
No: No Deletion

Batch-clears the copy count after a set amount of 
copies have been managed. The counts cannot be 
deleted separately in accordance with the Department 
ID Codes.

Outputs the number of copies produced by 
Department in a report format.

Job Accounting:

00.Set Completed