Belkin f5d6060 Betriebsanweisung
wireless networking
30
Configuring TCP/IP Settings Using a Handheld PC
TCP/IP settings are sometimes required to access certain networks. In
many cases, the factory settings of the Card will be properly set to access
your network. If you need specific TCP/IP information, you should contact
your network administrator.
many cases, the factory settings of the Card will be properly set to access
your network. If you need specific TCP/IP information, you should contact
your network administrator.
To access the TCP/IP setup (handheld PC):
1.
From the “Start” menu, select “Settings” and bring up the
“Control Panel”.
“Control Panel”.
2.
From the Control Panel, double-click on the “Network” icon.
3.
Select “Belkin Wireless PDA Network Card”.
4.
The TCP/IP screen will appear.
P74036_A_F5D6060_man.qxd 5/24/02 1:46 PM Page 30