Dukane 101 Betriebsanweisung

1

1) Remove cart from carton.
2) Roll the media center into position and lock the

two wheels.

3) Unlock the right rear door with the keys provid-

ed and swing open door.

4) Reach behind the left rear door and unlatch the

catch by pulling up on the lever, as indicated
on the instruction label on the door.

5) The side folding shelves can be raised and the

supports moved into position for placement of
laptop computer etc. (Maximum 14 lbs.)

6) Unlock the projector-tilting shelf, loosen knobs

on the side of cart and swing down into posi-
tion, tighten knobs.

7) Remove power cord with trip protector from the

inside of the cart. Bring out under the projector
shelf and plug into a 3 prong grounded power
outlet.

8) If camera is not already installed it will be in a

carton with power and output cable attached.

www.dukcorp.com/av

Remove Camera from its carton and insert cam-
era head up through the grommet hole in the
top of the cart. Place camera base on the plate
or foam block on top of the DVD/VCR. The
camera can be removed for viewing at other
locations within the range of its cables. (Camera
202 must be placed on the top of the cart)

9) Connect your computer to the VGA cable and

audio cable with mini plug that is coming out
of the top of the cart.

10) Power up the Mobile Presentation System by

turning on the switch that is located on the
power strip. Then turn on the DVD/VCR,
Camera and the projector.

11) Refer to the owners manuals for the detailed

projector, DVD/VCR, and Camera operation.

12) The remote controls for the projector,

DVD/VCR, and camera if included, are 
located in the storage drawer.

401-MPS10/MPS20-01