Infocus IN3116 Betriebsanweisung

Adjusting the image

If necessary, adjust the height of the projector by pressing the elevator foot

release button to extend the foot.

Rotate the elevator feet for granular adjustment of the projector’s height.

Avoid placing your hands near the hot exhaust vent at the side of the

projector.

Avoid placing your hands near the hot exhaust vent at the side of the

projector.

Position the projector to the desired distance from the screen at a 90 degree

angle to the screen. See page 6 for a table listing to screen sizes and

distances.

Adjust the zoom or focus.

If the image is not square, first make sure that the projector is perpendicular

to the screen. To reduce the size of the top edge of the image, press the top

Keystone button. To reduce the size of the bottom edge of the image, press

the bottom Keystone button.

If the left or right side of the screen is larger or smaller than the other, you

can turn the projector to the left or to the right a few degrees to square the

Adjust the Contrast or Brightness in the Basic Picture menu. See page 27 for

help with these menu adjustments.

Adjust height

Adjust distance

Adjust zoom and focus

Adjust keystone