Infocus in2124 Betriebsanweisung

Connecting a computer source

VGA connection

Connect one end of the provided computer cable to the

Computer in 1/Computer in 2

connector on the projector and the other to the VGA connector on your computer. If you

are using a desktop computer, you will need to disconnect the monitor cable from the

computer’s video port first.

HDMI connection

HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI provides an

interface between sources, such as set-top boxes, DVD players, and receivers and your

projector. Plug an HDMI cable into the video-out connector on the video device and into the

HDMI connector on the projector.

Connecting power

Connect the black power cord to the

Power

connector on the rear of the projector and to

your electrical outlet. If the Power Saving Mode feature is off, the Power LED on the Status

Indicator Panel (page 11) blinks blue. If the Power Saving Mode feature is on, the Power LED

is steady blue. By default, this feature is off. You can change the setting, see page 28

. NOTE

Always use the power cord that shipped with the projector.

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not included) to

your computer and to the

Audio in

connector on the projector. You may also need an

adapter.

If you are using a desktop computer and want to see the image on your computer screen as

well as on the projection screen, connect to the desktop’s computer cable to Computer 1

and the desktop’s monitor cable to the Computer out connector on the projector.

connect VGA cable

connect HDMI

connect power

connect audio cable