Infocus in102 Betriebsanweisung

Positioning your projector

11

1.

Select your screen size.

2.

Refer to the table and find the closest match to your screen size in the left 
columns labelled 

. Using this value, look across this row 

to the right to find the corresponding average distance from screen value in 
the column labelled 

. This is the projection distance.

3.

On that same row, look across to the right column and make note of the 

 value. This will determine the final vertical offset placement of 

the projector in relation to the edge of the screen.

4.

The recommended position for the projector is aligned perpendicular to the 
horizontal center of the screen, at the distance from the screen determined in 
step 2 above, and offset by the value determined in step 3 above.

For example, if you are using a 108-inch screen, the average projection distance is 
4320 mm (170”) and with a vertical offset of 82 mm (3.2”).

If you place the projector in a different position (to that recommended), you will 
have to tilt it down or up to center the image on the screen. In these situations, 
some image distortion will occur. Use the Keystone function to correct the 
distortion. See 

 for details.

This method can be used for situations where you have purchased this projector 
and would like to know what screen size will fit in your room.

The maximum screen size is limited by the physical space available in your room. 

1.

Measure the distance between the projector and where you want to position 
the screen. This is the projection distance.

2.

Refer to the table and find the closest match to your measurement in the 
average distance from screen column labelled 

. If the min and max 

values are available on the table, check that your measured distance is 
between the min and max distances listed on either side of the average 
distance value.

3.

Using this value, look across that row to the left to find the corresponding 
screen diagonal listed in that row. That is the projected image size of the 
projector at that projection distance.

4.

On that same row, look across to the right column and make note of the 

 value. This will determine the final placement of the screen in 

relation to the horizontal plane of the projector. 

For example, if your measured projection distance was 4.5 m (177”), the closest 
match in the 

 column is 4320 mm (170”). Looking across this row shows 

that a 108-inch screen is required.