Infocus in102 Betriebsanweisung
Operation
33
9.
Press
MENU/EXIT
to exit and save the settings.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.
saturated colors; a setting of “0” removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1.
Go to the
SYSTEM SETUP: Basic >
Presentation Timer
menu and press
MODE/ENTER
to display the
Presentation
Timer
page.
2.
Highlight
Timer Period
and decide the time
period by pressing
/
. The length of time
can be set from 1 to 5 minutes in 1-minute
increments and 5 to 240 minutes in 5-minute increments.
increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3.
Press
to highlight
Timer Display
and choose if you want the timer to show
up on the screen by press
ing
/
.
4.
Press
to
highlight
Timer Position
and set the timer position by pressing
/
.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
5.
Press
to highlight
Timer Counting Direction
and select your desired
counting direction by pressing
/
.
6.
Press
to
highlight
Sound Reminder
and decide if you want to activate
sound reminder by pressing
/
. If you select
On
, a double beep sound will
be heard at the last 30 seconds of counting down/up, and a triple beep sound
will be produced when the timer is up.
will be produced when the timer is up.
7.
To activate the presentation timer, press
and press
/
to highlight
On
and press
MODE/ENTER
.
8.
A confirmation message displays. Highlight
Yes
and press
MODE/ENTER
to
confirm. You will see the message “
Timer is On
” displaying on the screen.
The timer starts counting at the time the timer is on.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decreases from the preset time to 0.
Presentation Timer
Timer Display
Timer Position
Timer Counting Direction
Sound Reminder
Always
Top-Left
Count Down
Off
On
Off
MENU Back
Timer Period
15