Infocus LP335 Verweisanleitung

•

Just as there are differences in the displays of different moni-

tors, there are often differences between the computer image 
and the projected image. Adjust the brightness, tint and/or 
contrast from the Display menu. See “Brightness” on page 19, 
“Tint” on page 19 and “Contrast” on page 19. 

•

The lamp begins to lose brightness when it has been in use for 

a long time. Replace the lamp as described in “Replacing the 
Projection Lamp” on page 29.

•

A minor power surge may cause the lamp to shut off. Unplug 

the projector, wait at least a minute, then plug it back in.

•

Make sure the vents are not blocked.

The most current troubleshooting information can be found in 
the Service and Support section of our website at 

You’ll also find a Technical 

Library, FAQs, and support contacts including a technical sup-
port e-mail form.

Before calling your dealer or InFocus Technical Support for assis-
tance, please have the following information available:

•

the projector’s serial number (located on the bottom label)

•

the resolution of your computer.

Call InFocus Technical Support at 

between 6 a.m. 

and 6 p.m. PST, Monday through Friday. Service is available in 
North America after hours and on weekends for a fee at 
1-888-592-6800.

In Europe, call InFocus in The Netherlands at 

 

between 8 a.m. and 6 p.m. Central European Time.

In Asia, call 

between 9:30 a.m. and 5:30 p.m. 

Or, send us an e-mail at