ICOM ic-207h Gebrauchsanleitung

7

CALL CHANNEL OPERATION

35

■ Programming a call channel

In addition to an operating frequency, duplex information and
subaudible tone information (tone encoder or tone squelch
ON/OFF and its frequency) can be programmed into a call
channel.

➀

Push [BAND] to select a band, if necessary.

➁

Select the call channel by pushing [M/CALL] once or twice.
( “C1” or “C2” appears); then push [BAND] to change the
call channel, if desired.

➂

Set the desired frequency in VFO mode:

➥ Push [VFO] to select VFO mode.
➥ Set the frequency using the keypad.
➥ Set other data (e.g. offset frequency, duplex direction, subaudi-

ble tone encoder ON/OFF and its frequency), if required.

➃

Push [

(S.MW)

MW] for 1 sec. to program.

[EXAMPLE]: Programming 145.120 MHz into the VHF call channel via the microphone.

✔ CONVENIENT
The call channel can also be programmed from the VFO di-
rectly (similar to memory programming).

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Push [

(MR)

CALL] for 1 sec. to select a call

channel, then push [BAND] to change the call
channel, if desired.

Ç

Set the desired frequency in VFO mode:

• Push [VFO] to select VFO mode.
• Set the desired frequency using the keypad.
• Set other data, if required.

É

Push [FUNC] then [EMW] for 1 sec. to pro-
gram.

Call channel

VFO mode

then

for 1 sec.

for 1 sec.

MW

A