ICOM ic-2100h Gebrauchsanleitung

59

14

OTHER FUNCTIONS

■

Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another; or , data
from a PC to a transceiver using the optional CS-2100

CLONING SOFTWARE

.

➀

Connect the OPC-474 cloning cable with adapter plugs to
the [SP] jack of the master and slave transceivers.

• The master transceiver is used to send data to the slave trans-

ceiver.

➁

While pushing [M/CALL] (second switch from right)x, turn
power ON to enter cloning mode (master transceiver
only—power on only for slave transceiver).

• “CLONE” appears and the

transceivers enter the clone

standby condition.

➂

Push [S.MW] on the master transceiver.

• “CLOUT” appears in the mas-

ter transceiver’s display and

the S/RF indicator shows that

data is being transferred to the slave transceiver.

• “CL IN” appears automatically

in the slave transceiver’s dis-

play and the S/RF indicator

shows that data is being received from the master transceiver.

➃

When cloning is finished, turn power OFF, then ON to exit
cloning mode.

D

Data can be cloned to and from a PC (IBM compatible) using
the optional CS-2100 

CLONING SOFTWARE

and the optional

OPC-478 

CLONING CABLE

. Consult the CS-2100 

CLONING

SOFTWARE

HELP file for details.

D

☞

NOTE: DO NOT push any key on the slave transceiver
during cloning. This will cause a cloning error.

When the display at right ap-
pears, a cloning error has oc-
curred.

In such a case, both transceivers automatically return to the
clone standby condition and cloning must be repeated.