Olympus c-200 zoom Anleitung Für Quick Setup

Seite von 2
Confirm the Contents
Please check the contents of the box to confirm that you have all of the 
accessories shown below. If any of these are missing or damaged,
please contact your point of purchase.
Attach the Strap
Insert the Batteries and SmartMedia Card
1.
Make sure the lens barrier is closed.
Shoot the Picture
1.
Slide the lens barrier open until clicks.
2.
Bring the camera into position and
look through the viewfinder.
3.
Press the shutter but-
ton gently, and confirm
the green lamp next to
the viewfinder is illumi-
nating.
If the green lamp is blink-
ing, it means the subject
is out of focus. If this is
the case, gently press
the shutter button again.
4.
Full-press the shutter button.
NOTE
Pressing the monitor button (
) turns the 
monitor on.
It is also possible to take pictures while
looking at the monitor.
Enlarge Your Shots
Turn the Power Off
1.
Close the lens barrier halfway. Just before the lens barrier
comes in contact with the lens, it will make a click that you can
feel with your fingers.
The lens will recess into the camera.
Do not push the lens barrier against the lens.
2.
Wait until the lens fully retracts, and then close the lens barrier
the rest of the way to turn the power off.
3.
Close the flash.
Camera
C-200 ZO
OM
Dedicated USB 
(Universal Serial Bus) cable
Strap
Video cable
Four AA (R6) alkaline batteries
Basic manual, 
Quick Start Guide, Warranty,
User card (not included for
some regions)
SmartMedia card, 
Anti-static card case, Labels (2),
Write-protect adhesive seals (4),
Instructions
Made in Japan
Made in Japan
Software CD-ROMs
(including reference manual,
the USB driver and other 
necessary software)
Attach the strap to the camera as shown in the diagram.
2.
Slide the battery compartment
lock from 
to 
. Slide the
battery compartment cover to
the side and lift it up to open.
3.
Insert the batteries into the 
camera as shown in the dia-
gram, making sure that the
negative and positive poles
are correctly aligned.
4.
Close the battery compart-
ment cover, and slide the
battery compartment lock
from to .
5.
Open the card cover.
6.
Insert the SmartMedia card
into the camera as shown in
the diagram, making sure
that it is pushed all the way
in.
7.
Close the card cover so it
clicks into place.
The lens extends and the flash pops up.
When the lens does not extend, the lens barri-
er is not fully opened. 
Slide the lens barrier open until it clicks.
HQ
T
W
T
W
T
W
HQ
Zoom status
(Displayed during
 zoom lever operation.)
Zoom bar
T
W
Monitor
Push the zoom lever toward W
(Wide angle) to shoot wide-
angle shots.
Pull the zoom lever toward T
(Telephoto) to zoom in.
Lens barrier
Card cover
Lens barrier
Battery 
compartment cover
Monitor
Green Lamp
C200ZOOM_QSG_E  7/3/01 7:37 PM  Page 2