ENCORE ENHWI-G3 Betriebsanweisung

The figure below shows the rear panel of the Wireless Broadband Router. 

 

There are one 2 dBi Gain Antenna in the rear panel for wireless connection. 

Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps 
Ethernet connections. 

In the four port broadband router, there is an RJ-45 10/100Mbps Auto-MDIX port for the WAN 
that will fit the xDSL/Cable modem’s specification need. 

Plug the power adapter to this power jack 

Use a pin-shape item to push to reset this device to factory default settings. It will be useful too 
when the manager forgot the password to login, but the setting will be back to default setting. 

 

1.  Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband 

Router. 

2.  Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem. 

3.  Use another network cable to connect to the Ethernet card on the computer system; the other 

end of the cable connects to the LAN port of the Internet Broadband Router. Since the 
Wireless Broadband Router has four ports, you can connect up to four computers directly to 
the unit. There you do not have to buy a switch to connect these computers since one 
Internet Broadband Router functions both as a connection-sharing unit and as a switch. 

6