Omnitron FlexPoint 10T/2 4320-2 Merkblatt
Produktcode
4320-2
FlexPoint
FlexPoint
TM
FlexPoint
10T/2
10BASE-T Copper to 10BASE-2 Coax Media Converter
The FlexPoint 10T/2 is a Half-Duplex 10BASE-T UTP to
10BASE-2 coax media converter that facilitates the connection
of a coax segment to a 10BASE-T hub or workstation.
No manual configuration is required with the plug-and-play
No manual configuration is required with the plug-and-play
FlexPoint 10T/2. Connect the UTP and coax cables and the
installation is complete.
The FlexPoint 10T/2 supports categories 3, 4 or 5 wiring
The FlexPoint 10T/2 supports categories 3, 4 or 5 wiring
and connects to distances up to 100m. The FlexPoint 10T/2
detects and corrects wiring polarity reversals, and features
a crossover switch that facilitates connection to a hub or a
workstation.
The FlexPoint 10T/2 features a BNC connector supporting
The FlexPoint 10T/2 features a BNC connector supporting
50 ohm cabling with distances up to 185m. Per IEEE 802.3
standard, up to 30 workstations can be attached to the coax
segment. A termination switch provides a convenient 50 ohm
cable termination.
Descriptions of the LED indicators are provided on the label
Descriptions of the LED indicators are provided on the label
for easy in-the-field installation and maintenance. The LEDs
report the availability of power, port activity and link status,
polarity reversal detection and correction, collision and
jabbers.
FlexPoint modules can be mounted utilizing optional wall-
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
The wide variety of FlexPoint mounting and power options
provide flexible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
FlexPoint unmanaged media converters are easy to use
and provide dependable fiber connectivity in Enterprise and
Government networks around the world.
The FlexPoint 10T/2 is a Half-Duplex 10BASE-T to
■
10BASE-2 coax converter
Seamlessly connects 10BASE-2 devices to 10BASE-T
■
hubs or workstations
Supports 50 ohm coax to a maximum distance of 185m
■
and 30 stations
Features convenient, switch-selectable coax line
■
termination to save cost and space
Features a UTP crossover switch and automatic polarity
■
detection, correction and indication
Labeled status LEDs for quick and easy installation
■
Wall-mount or rack-mount on a 5-Module shelf or in
■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of
■
drivers required
Peace-of-mind reliability backed by a lifetime warranty
■
and free 24/7 technical support
Key Features