Bunn TF Server Zusätzliches Handbuch
CLEANING
1. Turn the entire lid assembly one-quarter turn counterclockwise to remove it for daily dishwasher cleaning.
Bunn-O-Matic recommends CASCADE
Bunn-O-Matic recommends CASCADE
®
dishwashing detergent for thorough cleaning. DO NOT use bleach.
CASCADE
®
is a registered trademark of Procter & Gamble Co., Cincinnati, Ohio.
2. Remove the ball retainer cap A from the top of the lid, the inlet tube assy D from the bottom of the lid, and balls
B & C for cleaning. (See illustration at left.) They are removed by unscrewing in a counterclockwise direction.
NOTE – Be Careful not to lose the balls. They are necessary for the lid to function properly.
B & C for cleaning. (See illustration at left.) They are removed by unscrewing in a counterclockwise direction.
NOTE – Be Careful not to lose the balls. They are necessary for the lid to function properly.
E
HOT
LIQUID
CAUTION
!
DO NOT USE ON
OPEN FLAME OR
ELECTRIC ELEMENTS.
DO NOT CLEAN WITH
BLEACH.
DO NOT IMMERSE
SERVER
H O T
C O N T E N T S
A R E
!
C A U T I O N
#26186.0000
#26178.0001
#26178.0002
(
1
3
⁄
4
gallon server)
(
1
⁄
2
gallon server)
USING THE SERVER
Simply select the desired brew batch size with the rotary switch on the brewer and place the corresponding
server beneath the funnel dripout. One or one and three-quarter gallon batches may be brewed into the 1
3
⁄
4
gallon
server. Press and release the start switch to initiate a brew cycle. Place the decaffeinated coffee indicator in the
proper position for the type of coffee used before brewing. Fresh HOT coffee is immediately available at the faucet.
proper position for the type of coffee used before brewing. Fresh HOT coffee is immediately available at the faucet.
NOTE – Be careful that the server can hold the entire brew batch selected before initiating a brew cycle.
USER NOTICES
The notices on this server should be kept in good condition. Replace unreadable or damaged labels.
A
B
C
D
3. Using the supplied brush #26367.0000, clean the
airvent E on the bottom of the lid assembly. (See illustra-
tion at right.)
airvent E on the bottom of the lid assembly. (See illustra-
tion at right.)
4. After cleaning, reassemble the lid assembly, being
careful to reinstall all parts removed.
careful to reinstall all parts removed.
5. Disassemble the faucet for thorough cleaning. Using
the supplied #00674.0000 brush, clean the faucet shank.
After cleaning, reassemble and reinstall the faucet.
the supplied #00674.0000 brush, clean the faucet shank.
After cleaning, reassemble and reinstall the faucet.
6. Clean the sight gage with the suppied #00675.0000
brush.
7. Clean all other surfaces of the server with a damp cloth
rinsed in any mild, non-abrasive, liquid detergent.
brush.
7. Clean all other surfaces of the server with a damp cloth
rinsed in any mild, non-abrasive, liquid detergent.
8. Thoroughly rinse the entire server after cleaning.
9. Fill with brew temperature water and leave full over-
night. NOTE- Empty the water from the server before
brewing.
9. Fill with brew temperature water and leave full over-
night. NOTE- Empty the water from the server before
brewing.
10881.1 080100