PowerDsine 6548 Benutzerhandbuch

 

 

 

Read the following safety information before carrying out any installation, 
removal or any maintenance procedure on the Power over Ethernet Midspan. 
Warnings contain instructions that must be followed for personal and product 
safety. Follow all instructions carefully. 

 

WARNINGS   
 

•  Read the Installation Instructions in Section 3 before connecting 

the Power over Ethernet Midspan to its power source. 

 

•  A grounded power cord must be utilized with the Midspan as 

defined in paragraph 1.2. 

 

•  This product relies on the building installation for short-circuit 

(overcurrent) protection. Ensure that a fuse or circuit breaker no 
larger than 15 A for 120 VAC, (U.S.) 10 A for 230 VAC 
(international) is utilized. 

 

•  Do not perform any work on the unit or connect/disconnect 

cables during periods of lightning activity. 

 

•  A voltage mismatch can damage the equipment and may pose a 

fire hazard. If the voltage indicated on the label is different from 
the power outlet voltage, do not connect the Power over Ethernet 
Midspan to this outlet. 

 

•  For shelf-mounted equipment, be certain that the surface is 

stable and strong enough to support the equipment. Do not stack 
more than two of the Power over Ethernet Midspans on a single 
shelf. 

•  Ultimate disposal of this product should be handled according to 

all local laws and regulations.  

•  The Power over Ethernet Midspan "Data" and "Data + Power" 

ports are shielded RJ-45 data sockets. They cannot be used as 
Plain Old Telephone Service (POTS) telephone sockets. Only 
RJ-45 data connectors may be connected to these sockets. 

a