TOA 30-sd Betriebsanweisung
Specifications
MODEL NUMBER
Enclosure
Speaker
Speaker
Handling Power Capacity
Continuous Pink Noise
Continuous Program
Continuous Program
Impedance
Sensitivity
Frequency Response
Sensitivity
Frequency Response
Crossover Frequencies
Middle Frequency
Middle Frequency
Level Control
Finish (Enclosure)
Dimensions
Dimensions
Weight
38-SD
30-SD
Vented (bass reflex) type
15" (38cm) woofer Radial horn and
compression driver Two 3" tweeters
12" (30cm) woofer Radial horn and
compression driver 3" tweeter
120 watts of band-limited pink noise [50Hz~ 20kHz]
360 watts
8 ohms
102dB (1W/1m)
50Hz ~ 20kHz
50Hz ~ 20kHz
100dB (1W/1m)
60Hz~ 20kHz
1kHz, 10kHz
0~ -10dB (with an "OFF" position)
Polyester paint, Color: Gray
675(H)x510(W)x460(D) mm
26.6(H)x20.1(W)x18.1(D)
26.6(H)x20.1(W)x18.1(D)
inches
27kg (59.5 Ibs)
590(H)x440(W)x390(D) mm
23.2(H)x17.3(W)x15.4(D) inches
21kg (46.3 Ibs)
* Specifications are subject to change without notice.
Input Panel
FULL RANGE INPUT-
Connects to the output of power amplifier. This
is
the input jack when used as a full range speaker.
BI-AMP INPUT (HIGH)-
Connects to the amplifier for high frequency when
driving the speaker system with bi-amplification.
driving the speaker system with bi-amplification.
BI-AMP INPUT (LOW)-
Connects to the amplifier for low frequency when
driving the speaker system with bi-amplification.
driving the speaker system with bi-amplification.
MID-FREQUENCY ATTENUATOR-
Adjusts the sound level of the mid-frequency when
driving the speaker system as a full range speaker
system. Make the level setting according to the
environmental conditions, although almost flat
frequency response is obtainable so far as the
driving the speaker system as a full range speaker
system. Make the level setting according to the
environmental conditions, although almost flat
frequency response is obtainable so far as the
attenuator remains within the "NORMAL" range.
FULL RANGE OUTPUT
Make bridge connection of this output to the full
range input of another speaker system when driving
Make bridge connection of this output to the full
range input of another speaker system when driving
two speaker systems with one power amplifier.
BI-AMP OUTPUT (HIGH)
For bridge connection in high frequency to another
For bridge connection in high frequency to another
speaker.
BI-AMP OUTPUT (LOW)
For bridge connection in low frequency to another
For bridge connection in low frequency to another
speaker.
CAUTION:
DO NOT USE THE BI-AMP JACKS UNLESS THE
SPEAKER
SPEAKER
SYSTEM IS DRIVEN
UNDER
MULTI-AMPLIFIERED
SYSTEM.
CONNECTING
THE FULL RANGE OUTPUT TO THE BI-AMP
INPUT JACK MAY DAMAGE THE SPEAKER.
INPUT JACK MAY DAMAGE THE SPEAKER.
Frequency Response (1W/1m: Pink Noise)
38-SD
30-SD
— : Attenuator at NORMAL position.
--- : Attenuator at MAX. position.
Mounting on the speaker stand
The 38-SD and 30-SD speaker systems can be easily mounted on
their exclusive speaker stand Model ST-20 (optional).
(See illustration)
their exclusive speaker stand Model ST-20 (optional).
(See illustration)
133-01-172-80
speaker system
stand adapter
ST-20