ConnectGear gs-1124 Betriebsanweisung

User Manual    

 

This section will give users a quick start for:

   

 

    -  

Hardware and Cable Installation 

   -  Management Station Installation 

   -  Software booting and configuration  

 

At the beginning, please do first: 

⇒ Wear a grounding device to avoid the damage from electrostatic discharge 

 

⇒ Be sure that power switch is OFF before you insert the power cord to power 

source 

• 

Installing Optional SFP Fiber Transceivers to the 24 Gigabit Web Smart 

   Note: If you have no modules, please skip this section. 

 

 

 
•

 Connecting the SFP Module to the Chassis: 

The optional SFP modules are hot swappable, so you can plug or unplug it         
before or after powering on. 

         1.  Verify that the SFP module is the right model and conforms to the chassis 

         2.  Slide the module along the slot.  Also be sure that the module is properly 

seated against the slot socket/connector 

         3.  Install the media cable for network connection 

         4.  Repeat the above steps, as needed, for each module to be installed into                                

slot(s) 

         5.  Have the power ON after the above procedures are done 

Fig. 2-1 Installation of Optional SFP Fiber Transceiver