Miller matic 140 mig welder auto-set (907335) Техническое Руководство
Processes
MIG (GMAW)
Flux Cored (FCAW)
Flux Cored (FCAW)
Light Industrial Applications
Light Fabrication
Maintenance and Repair
Auto Body
Farm/Home
Maintenance and Repair
Auto Body
Farm/Home
Quick
Specs
Specs
MIG Arc Welding Power Source,
Wire Feeder and Gun Package
Issued September 2010 • Index No. DC/12.42
Smooth-Start
™
provides a smooth,
spatter-free start. It’s the best-starting
machine in the small MIG machine
category. No pop gun starts and no
spatter to clean up.
machine in the small MIG machine
category. No pop gun starts and no
spatter to clean up.
The Power of Blue
®
.
Input Power
115 V, 20 A, 60 Hz, Single-Phase
Rated Output
90 A at 18 VDC, 20% Duty Cycle
63 A at 21 VDC, 20% Duty Cycle, CSA
63 A at 21 VDC, 20% Duty Cycle, CSA
Amperage Range
30 –140 A
Max. Open-Circuit Voltage
28
Welder is warranted for 3 years, parts and labor. Original
main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Comes Complete With:
Power source
6 ft (1.8 m) power cord and plug
10 ft (3 m), M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith
6 ft (1.8 m) power cord and plug
10 ft (3 m), M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith
®
Argon and AR/CO
2
mix regulator/flow
gauge with hose
Spool of Hobart
Spool of Hobart
®
.030 in (0.8 mm) solid wire
Two contact tips for .024 in (0.6 mm) wire and
two contact tips for .030 in (0.8 mm) wire
Dual-groove quick-change drive roll for .024 in
(0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas
solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge ➤
#229 895
two contact tips for .030 in (0.8 mm) wire
Dual-groove quick-change drive roll for .024 in
(0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas
solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge ➤
#229 895
Note: Shielding gas and safety
equipment not included.
equipment not included.
Thermal overload protection
shuts down unit and activates the
over temperature light if airflow is
blocked or duty cycle is exceeded.
Automatically resets when fault is
corrected and unit cools.
shuts down unit and activates the
over temperature light if airflow is
blocked or duty cycle is exceeded.
Automatically resets when fault is
corrected and unit cools.
Self-resetting motor protection
circuit eliminates the need to find
and replace fuses.
circuit eliminates the need to find
and replace fuses.
Miller’s “Tip Saver” short circuit
protection shuts down output
when tip is shorted to the work.
Extends contact tip life and protects
internal components from damage.
Trigger reset permits quick reset at
torch rather than unit.
protection shuts down output
when tip is shorted to the work.
Extends contact tip life and protects
internal components from damage.
Trigger reset permits quick reset at
torch rather than unit.
Millermatic
®
140
Auto-Set
™
Uses 4 or 8 in (102 or 203 mm)
spools and can be set up to weld with
wire sizes .024–.030 in (0.6–0.8 mm)
mild/stainless steel and .030 –.035 in
(0.8 – 0.9 mm) flux cored.
spools and can be set up to weld with
wire sizes .024–.030 in (0.6–0.8 mm)
mild/stainless steel and .030 –.035 in
(0.8 – 0.9 mm) flux cored.
Easy access to output studs
provides convenient polarity
changeover when changing
from solid or flux cored wires.
provides convenient polarity
changeover when changing
from solid or flux cored wires.
Standard built-in solid-state
contactor circuit makes wire
electrically “cold” until trigger is
pulled, making the unit safer.
It’s also easier to position torch
to work before starting weld.
contactor circuit makes wire
electrically “cold” until trigger is
pulled, making the unit safer.
It’s also easier to position torch
to work before starting weld.
Semiautomatic constant-voltage
wire welding package is capable
of welding 24 gauge up to 3/16 in
(0.8 – 4.8 mm) mild steel.
wire welding package is capable
of welding 24 gauge up to 3/16 in
(0.8 – 4.8 mm) mild steel.
Auto-Set
™
: The right settings automatically.
• Set the wire diameter, a blue light shows
that Auto-Set
™
is activated
• Dial in the thickness of what you’re welding
• Start welding with the exact parameters
• Start welding with the exact parameters
you need!
Infinite voltage control gives you the
flexibility to manually set the machine
when welding aluminum, stainless steel,
or anytime you want to set your own
parameters on mild steel.
flexibility to manually set the machine
when welding aluminum, stainless steel,
or anytime you want to set your own
parameters on mild steel.
Durable cast-aluminum drive system
incorporates dual-groove quick-change
drive roll and spring-loaded tension arm
with calibrated tension knob, all designed
to make set up easier and faster.
incorporates dual-groove quick-change
drive roll and spring-loaded tension arm
with calibrated tension knob, all designed
to make set up easier and faster.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125