Avaya 3606 Betriebsanweisung

Avaya 3606 Wireless IP Telephone User’s Guide

Issue  2   February 2003 

■

The wireless telephone’s LCD panel displays information about the status 
of your wireless telephone and prompts you about features.

■

If the wireless telephone’s Battery Pack is low, you will hear a soft beep 
and see the “BATT” or “Low Battery” message in the display.

■

Improper disposal of Battery Packs can damage the environment. Dispose 
of batteries properly.

■

You can control the wireless telephone’s volume level and the type of ring.

■

To protect the wireless telephone, use a carrying case.

The wireless telephone and chargers have been designed to withstand the wear 
and tear of normal use; however, avoid dropping the wireless telephone or 
knocking it against hard surfaces. Carrying the wireless telephone in a holster or 
carrying case will help to protect it. 

There are no serviceable parts in the wireless telephone or chargers. You should 
not open the wireless telephone case nor disassemble the chargers. Doing so will 
void your warranty.

Turn off the wireless telephone and unplug the charger before you clean them. 
Never immerse either in water. Clean the exterior surfaces, including the charging 
contacts, with a cloth that has been slightly moistened with water. Take care not to 
exert undue pressure on the charger electrical contacts while wiping.

Wiping the handset surface with a water-dampened cloth or paper towel will 
remove most films or residues. If the soiling is too stubborn for plain water, a mild 
detergent solution may be used. Be sure to wipe away any detergent residue with 
a clean water-dampened cloth.

The wireless telephone may be cleaned with any general-purpose household 
glass and surface-type cleaner. DO NOT SPRAY THE HANDSET DIRECTLY! 
Isopropyl alcohol may be used occasionally applied by a cloth or paper towel. 
When using alcohol, do not rub the keypad characters vigorously. Doing so will 
significantly degrade legibility.