Avaya callmaster iv Installationsanweisungen

Installation

Issue  5   August 2005

3

■

The total distance between the CALLMASTER IV voice terminal with 
recorder interface active and the recording device should not exceed 200 
feet/60.96 meters.

■

The distance between the CALLMASTER IV voice terminal and the PBX 
must NOT exceed the following:

— In 2-wire mode, with 22-gauge wire, the distance between the 

CALLMASTER IV and the PBX should not exceed 
5,500 feet/1,676.4 meters; with 24-gauge wire, the distance should 
not exceed 3,500 feet/1,066.8 meters; with 
26-gauge wire, the distance should not exceed 
2,200 feet/670.56 meters.

■

The record output impedance is approximately 600 ohms and the output 
channel is isolated from the voice terminal with an FCC Part 68-approved 
voice transformer.

3

The 2-wire/4-wire line adapter (PEC: 32302; Comcode: 407124114 for a single 
adapter; PEC: 32303 for a package of 25 adapters) is available to accommodate 
situations in which customers need to upgrade from an analog-type RJ11C jack to 
an 8-wire RJ45X-type jack. This adapter eliminates the need to remove RJ11C 
jacks which are presently being used and install new RJ45X jacks in their place. 

Line Cord

Routing 

LINE Jack

 

Channel