Avaya MDW 9040 Kurzverweiskarte
7
Fastening the Belt Clip
To fasten the belt clip to the handset
(or battery pack), do the following:
(or battery pack), do the following:
1. Hold the handset (or battery
pack) so that the back of the
handset (or battery pack) is
facing you.
handset (or battery pack) is
facing you.
2. Hold the belt clip so that it
looks like the letter “T.”
3. Latch the right edge of the
belt clip into the
corresponding groove on the
inner side of the battery pack.
(The groove is about 1/4 inch
from the top of the battery
pack.)
corresponding groove on the
inner side of the battery pack.
(The groove is about 1/4 inch
from the top of the battery
pack.)
(...then
Belt Clip
and
push
snap)
Back of Handset
Battery Pack
(outside)
(outside)
(Latch...)
QkRef2Source.fm Page 7 Friday, April 13, 2001 1:14 PM