Avaya 3910 Betriebsanweisung
Distinctive Ring (#308)
Description
This System Programming procedure determines whether calls should ring at a
standard device using the system’s distinctive ringing patterns—different
patterns for outside, intercom, and transferred calls—or whether all calls should
ring like outside calls.
standard device using the system’s distinctive ringing patterns—different
patterns for outside, intercom, and transferred calls—or whether all calls should
ring like outside calls.
Considerations
■
■
■
Change the setting to Not Active if a standard device such as a modem or
answering machine does not pick up intercom or transferred calls.
answering machine does not pick up intercom or transferred calls.
If distinctive ring is set to Not Active for an extension where both a system
phone and a standard device are installed, the system phone continues to
use distinctive ringing, but all calls ring at the standard device using a
single ring burst.
use distinctive ringing, but all calls ring at the standard device using a
single ring burst.
The system does not pass distinctive ringing patterns generated by a PBX
or central office through to extensions (regardless of the setting for this
feature).
feature).
Valid Entries
1 = Active (only outside calls use a single ring burst)
✔
2 = Not Active (outside, intercom, and transferred calls use a single ring burst)
Programming
To change the Distinctive Ring setting:
1.
2.
3.
4.
5.
Press
Feature
0
0
System Program
System Program
#
3
0
8
.
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to program extension 22, press
2
2
.
To activate or deactivate Distinctive Ring for the extension, press
Next Data
until the appropriate value displays.
To program another extension, press
Next Item
or
Prev Item
until the correct
extension number shows on the display. Repeat Step 3.
Select another procedure or exit programming mode.
5-38
Distinctive Ring (#308)