Avaya 1603SW Betriebsanweisung

This section is limited to describing a generic administration that works with the 1603SW-I SIP 
IP Deskphones. Three DHCP software alternatives are common to Windows operating 
systems:

●

Windows NT

®

 4.0 DHCP Server

●

Windows 2000

®

 DHCP Server

●

Windows 2003

®

 DHCP Server

Any other DHCP application might work. It is the responsibility of the customer to install and 
configure the DHCP server correctly. 

DHCP server setup involves:

1. Installing the DHCP server software according to vendor instructions.

2. Configuring the DHCP server with:

●

IP Addresses available for the 1603SW-I SIP IP Deskphones.

●

The following DHCP options: 

- Option 1 - Subnet mask.

As described in 

, item 3.

- Option 3 - Gateway (router) IP Address(es). 

As described in 

, item 1. If using more than one address, the total list can 

contain up to 127 total ASCII characters. You must separate IP Addresses with 
commas with no intervening spaces.

- Option 6 - DNS server(s) address list. 

If using more than one address, the total list can contain up to 255 total ASCII 
characters. You must separate IP Addresses with commas with no intervening spaces. 
At least one address in Option 6 must be a valid, non zero, dotted decimal address.

- Option 12 - Host Name. 

Value is AVohhhhhh, where: o has one of the following values based on the OID (first 
three octets) of the telephone’s MAC address: “A” if the OID is 00-04-0D, “B” if the OID 
is 00-1B-4F, (SIP software Release 2.0+), “E” if the OID is 00-09-6E, “L” if the OID is 
00-60-1D, “T” if the OID is 00-07-3B, (SIP software Release R2.0+) and “X” if the OID 

TLSSRVR 

IP Address(es) or DNS name(s) of Avaya file server(s) used to 
download configuration files. 
Note: Transport Layer Security is used to authenticate the server.

VLANTEST

Number of seconds to wait for a DHCPOFFER on a non-zero VLAN. 
The default is 60 seconds.