Alesis ML-9600 Verweishandbuch
Chapter 4
12
A
LESIS
ML-9600 R
EFERENCE
M
ANUAL
Moving the cursor under the "U" character and pressing UP/YES and DOWN/NO will change the
"write protect" status of the Track; U stands for Unprotected, and P stands for Protected. When a Track
is write protected it may neither be recorded over nor cropped.
"write protect" status of the Track; U stands for Unprotected, and P stands for Protected. When a Track
is write protected it may neither be recorded over nor cropped.
Also shown are the Track’s sample rate and word length. If you are creating a new Track and have not
recorded any audio yet, these icons will not be lit. Once audio has been recorded into a Track, the
sample rate and word length icons will reflect the recorded sample rate and word length, which can
vary from Track to Track in a playlist, based on the settings that have been selected for sample rate and
word length (see Chapter 3: HD Mode Operation).
The large 7-segment numbers on the left side of the display indicate the current Track number. Pressing
SKIP or SKIP
will decrement or increment through all Tracks in a playlist. These numbers
have a different function in CD mode; see Chapter 7: CD Mode Operation for details.
The numbers directly below the Track Number indicator are the Track Time display. These numbers
are displayed in one of four ways, dependent upon the Track Time Counter Mode. To change modes,
press the TIME DISPLAY button, which will toggle through Single, Single Remaining, Total, and Total
Remaining modes. Single mode reflects the elapsed time within a single Track, while Single
Remaining
are displayed in one of four ways, dependent upon the Track Time Counter Mode. To change modes,
press the TIME DISPLAY button, which will toggle through Single, Single Remaining, Total, and Total
Remaining modes. Single mode reflects the elapsed time within a single Track, while Single
Remaining
mode indicates remaining time within a Track. Total mode reflects the elapsed time of the
entire playlist, and Total Remaining mode indicates remaining time in the playlist.
If there is a compact disc in the CD drive, the CD Format icons reflect the resolution of the CD currently
in the drive, either Red Book (RDBK) or CD24 (CD24). If the CD in the drive is a blank CD-R disc, or if
there is no CD in the drive, these icons will not be lit.
The HD Free Space counter indicates the amount of recording time left on the hard disk, expressed in
hours, minutes (if the time remaining is less than one hour), or seconds (if the time remaining is less
The HD Free Space counter indicates the amount of recording time left on the hard disk, expressed in
hours, minutes (if the time remaining is less than one hour), or seconds (if the time remaining is less
than one minute). This number will change based on the currently selected sample rate and word
lengths; i.e. shorter word lengths and lower sample rates allow longer recording time. This number will
also change during recording, as more space on the disk is used for audio.
lengths; i.e. shorter word lengths and lower sample rates allow longer recording time. This number will
also change during recording, as more space on the disk is used for audio.
4.5 P
LAYLIST
E
DIT
M
ODE
P
AGES
There are five "pages" that can be accessed while in Playlist Edit mode; these playlists allow you to edit
a Track's Start Time, view a Track's End Time and Length, and edit a Track's Fade In and Fade Out.
These pages can be accessed by moving the cursor under the leftmost field in the lower line of the
alphanumeric display (the Playlist Edit Page Field) and using the UP/YES and DOWN/NO keys to
a Track's Start Time, view a Track's End Time and Length, and edit a Track's Fade In and Fade Out.
These pages can be accessed by moving the cursor under the leftmost field in the lower line of the
alphanumeric display (the Playlist Edit Page Field) and using the UP/YES and DOWN/NO keys to
scroll through the pages, each of which are discussed in detail below.
4.5
A
T
RACK
S
TART
T
IME
A Track’s start time indicates where the Track begins relative to the start of the playlist. A Track’s start
time cannot be within another Track’s audio; i.e. Track 2 cannot begin at 00:30 if Track 1 begins at 00:00
time cannot be within another Track’s audio; i.e. Track 2 cannot begin at 00:30 if Track 1 begins at 00:00
and is 1 minute long.
To view a Track’s start time the playlist, move the cursor to the Playlist Edit Page Field and press the
UP/YES
To view a Track’s start time the playlist, move the cursor to the Playlist Edit Page Field and press the
UP/YES
or DOWN/NO buttons until the characters "St" are displayed. Figure 4.5.1 illustrates how the
display will look when indicating Track start time.