Alesis ML-9600 Verweishandbuch
Chapter 8
42
A
LESIS
ML-9600 R
EFERENCE
M
ANUAL
into the currently selected playlist. It is important, therefore, to make sure that you have selected the
appropriate playlist before switching to CD mode.
After switching to CD mode (via the HD/CD button), pressing the TRACK MOVE button will bring
up the CD track move page, as shown in Figure 7.2.1.
appropriate playlist before switching to CD mode.
After switching to CD mode (via the HD/CD button), pressing the TRACK MOVE button will bring
up the CD track move page, as shown in Figure 7.2.1.
To copy an entire CD to the currently selected playlist, press the CURSOR LEFT button until the
cursor is under the "CDTrk" field, then press the UP/YES button, which will bring up the display
cursor is under the "CDTrk" field, then press the UP/YES button, which will bring up the display
shown in Figure 7.3.1.
Figure 7.3.1
Move CD to Playlist Page
Pressing TRACK MOVE again will prompt you with an "Are you sure? Y/N" message. Pressing
DOWN/NO
at that point will cancel the CD Move operation. Pressing UP/YES at the prompt will
confirm the CD Move and will begin the process.
If the destination Playlist already has one or more Tracks in it, the display will prompt "PList not
empty. Proceed?
If the destination Playlist already has one or more Tracks in it, the display will prompt "PList not
empty. Proceed?
" Pressing DOWN/NO will cancel the CD move operation. Pressing UP/YES will
begin to copy the entire CD into the destination playlist, with the first CD track placed after the last
Track in the playlist.
Track in the playlist.