Magellan 510 Betriebsanweisung
Magellan eXplorist Map Screen
Magellan eXplorist 510 / 610 / 710 User Manual
9
Maps
Additional maps for the eXplorist may be available
from the Magellan Store at www.magellangps.com.
Once the map has been purchased and installed you
will need activate it in your receiver.
Accessing Loaded Maps
1.
Tap the Map screen to bring up the Four
Corner Menu screen.
2.
Tap on the Main Menu icon in the lower left
corner.
3.
Select
Maps.
4.
Choose World Maps or Detailed Maps to see
the individual maps installed.
5.
If the map has a checkmark before its name
it has been activated and is in use by your
receiver. You can toggle the map on or off by
tapping on the check mark box to the left of the
map name.
6.
Tap on the map name to get more detailed
information about the map that is installed.
Pan Mode
Accessing Pan Mode
1.
Slide your finger across the map area.
2.
The Map screen goes into pan mode with a
Back button and an Options Menu icon at the
bottom.
3.
Keep moving your finger across the map to
display a point that you would like to create a
route to or a waypoint.
Using the Zoom In and Zoom Out buttons
will help you pick the location quickly and
accurately.
Creating a Waypoint in Pan Mode
1.
Tap on the map at the point you want to create
a waypoint.
2.
When the popup appears, tap on the left side
of the popup.
3.
Modify and save the waypoint as described in
the chapter on Waypoints.
Creating a Route in Pan Mode
1.
Tap on the map at the point you want to create
a waypoint.
2.
When the popup appears, tap on the right side
of the popup (the orange Go icon).