Epson DFX-9000 Verweisanleitung
98
Control Panel
Follow these steps to enter Default-setting mode and change the
settings:
settings:
1. Make sure paper is loaded and turn off the printer.
c
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise, you may damage the
printer.
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise, you may damage the
printer.
2. Hold down the Font button and turn on the printer.
Setting mode appears on the LCD panel, indicating that
the printer is in Default-setting mode.
the printer is in Default-setting mode.
Note:
The instructions and current settings are printed in the language
you selected in SelecType mode. If you need a different language,
choose the one you want using SelecType mode. (See page 94 for
details.)
The instructions and current settings are printed in the language
you selected in SelecType mode. If you need a different language,
choose the one you want using SelecType mode. (See page 94 for
details.)
3. Select one of the three main menus by pressing the SetU
(Tear Off) or SetD (Top of Form) button.
Note:
You can scroll the menus by holding the SetU (Tear Off) or
SetD (Top of Form) button for a few seconds.
You can scroll the menus by holding the SetU (Tear Off) or
SetD (Top of Form) button for a few seconds.
4. If you select Print Settings, press the ItemD (Pitch) button to
print the current settings.
If you select Form w/labels or Panel lock out, press the
ItemU (Font) or ItemD (Pitch) button to select the setting
you want to change and go to the next step.
ItemU (Font) or ItemD (Pitch) button to select the setting
you want to change and go to the next step.
Note:
You can scroll the menu by holding the ItemU (Font) or ItemD
(Pitch) button for a few seconds.
You can scroll the menu by holding the ItemU (Font) or ItemD
(Pitch) button for a few seconds.