Epson R3000 Anleitung Für Quick Setup
Caution: Don’t remove any
other seals or the cartridges
may leak.
other seals or the cartridges
may leak.
4
Insert the cartridges in the holder for each color.
5
Press the cartridges down until they click.
6
Close the cartridge cover, then close the printer cover.
7
The printer begins priming the ink delivery system. This takes about
10 minutes. Do not turn off the printer, load paper, or open any covers
until the process is complete.
10 minutes. Do not turn off the printer, load paper, or open any covers
until the process is complete.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
waste ink.
Unpack
Caution: Do not open ink cartridge packages until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials.
2
Open the top cover and remove any tape inside.
3
Open the front cover and remove the transportation lock.
Tip: Keep the transportation lock in the accessories box. You can also use
the accessories box to store your printer manual and spare ink cartridges.
the accessories box to store your printer manual and spare ink cartridges.
1
Turn
on
1
Connect the power cable.
Caution: Do not connect to your computer yet.
2
Press
the power button.
3
Select your language. (Press OK for English.)
To change the language, press or to select it, then press OK.
2
*412036900*
*412036900*
3
3
Load paper against the right edge and behind the tab. Then press the
button on the edge guide and slide it to the edge of the paper.
button on the edge guide and slide it to the edge of the paper.
Note:
Don’t load the paper sideways. Always load
it short edge fi rst.
Front manual feed tray
You can print on these fine art media using the front
manual feed tray:
manual feed tray:
•
Epson Velvet Fine Art Paper
•
Epson Watercolor Paper Radiant White
•
Epson UltraSmooth
®
Fine Art Paper
•
Epson Exhibition Fiber Paper
•
Epson Hot Press Bright
•
Epson Hot Press Natural
•
Epson Cold Press Bright
•
Epson Cold Press Natural
•
PremierArt™ Matte Scrapbook Photo Paper for Epson
Note: For instructions on loading roll paper, a CD or DVD, or thick media,
see the printed Basics guide.
see the printed Basics guide.
1
Remove any paper from the sheet feeder.
2
Open the rear support.
3
Fully extend the rear support.
4
Open the front cover, then push the center of the manual feed tray to
extend it.
extend it.
5
Insert a single sheet of fine art media. Insert it short end first with the
printable side face up.
printable side face up.
4120369 Rev.0
1-F
1-F
C
4120369 Rev.0
1-F
1-F
M
4120369 Rev.0
1-F
1-F
Y
4120369 Rev.0
1-F
1-F
K
Start Here
Epson Stylus
®
Photo R3000
Read these instructions before using your product.
4
Load
paper
Sheet feeder
You can load plain paper, and most glossy and matte papers, in the
sheet feeder.
sheet feeder.
1
Open the paper support and pull up the extensions.
2
Open the front cover, then extend the output tray.
Install ink cartridges
1
Open the printer cover, then open the ink cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack them.
3
Remove only the yellow tape from each cartridge.