Epson 5000 Benutzerhandbuch

Enter tear-off mode by performing the following steps:

1. Make sure the printer is turned off.

2. Turn DIP switch 2-3 on.

3. Turn the printer on.

When tear-off mode is on and you print on continuous paper on the
push tractor, the printer advances the final printed page to the tear-

off position. Then you can tear off all printed pages.

If the perforation is not aligned with the tear-off edge, adjust the
tear-off position as described in the section on adjusting the tear-off

position later in this chapter.

When you resume printing, the printer automatically feeds 

paper

back to the loading position and begins printing. (You can also

manually feed the paper back to the loading position by pressing

the 

or 

button.)

Whether or not the printer is in tear-off mode, you can use the

button to advance continuous paper to the tear-off

position by following the steps below.

1.

Make sure printing has finished. Then press the 

button. The printer advances the paper to the tear-off edge and

the 

light comes on.

Tear off all printed pages. If the perforation is not aligned with

the tear-off edge, adjust the tear-off position as described in the

next section.

When you resume printing, the printer automatically feeds the

paper back to the loading position and begins printing. (You can

also manually feed the paper back to the loading position by

pressing the 

or 

button.)