Epson LQ-1010 Benutzerhandbuch

You can select baud rates from 

to 

BPS (Bits Per Second).

When setting the baud rate, make sure you use the bit rate selection

table for printers with buffers (in 

interface manual).

For more information on the 

input buffer settings, see the

section on DIP switch functions in Chapter 3 of this manual.

When the vacant area for data in the input buffer drops to 

bytes,

the printer outputs an X-OFF code or sets the DTR flag to 

indicating that it cannot receive data.

When a parity error is detected, your printer prints an asterisk (*). All

other errors, including framing and overrun, are ignored.