Epson LQ-670 Техническое Руководство
EPSON LQ-670
3/97
EPSON LQ-0670 - 7
Note:
Paper source settings (such as bin 1 or bin 2) made in
your software override bin settings made with the Tear
Off/Bin button, so use your software to make this
setting whenever you can.
Paper source settings (such as bin 1 or bin 2) made in
your software override bin settings made with the Tear
Off/Bin button, so use your software to make this
setting whenever you can.
Advanced Control Panel Functions
Besides giving you control of the basic operation of the
printer, the control panel allows you to enter the printer’s
default-setting and quiet modes, and to access several features
helpful when troubleshooting.
printer, the control panel allows you to enter the printer’s
default-setting and quiet modes, and to access several features
helpful when troubleshooting.
To use the functions below (in italics), turn on the printer
while pressing the corresponding control panel button(s).
while pressing the corresponding control panel button(s).
Letter-quality self test = Load/Eject
Performs a letter-quality self test, which helps you determine
the source of some printing problems. See “Printing a Self
Test” for details.
the source of some printing problems. See “Printing a Self
Test” for details.
Draft self test = LF/FF
Performs a draft self test, which helps you determine the
source of some printing problems. See “Printing a Self Test”
for details.
source of some printing problems. See “Printing a Self Test”
for details.
Bidirectional adjustment = Pause
Turns on the bidirectional adjustment mode, which allows
you to correct printing alignment problems.
you to correct printing alignment problems.
Hex dump = Load/Eject + LF/FF
Prints the data sent to the printer in hexadecimal code, which
helps experienced users determine the source of some printing
problems.
helps experienced users determine the source of some printing
problems.
Default setting = Font
Turns on the default-setting mode, which allows you to
change the printer’s default settings. For more information,
see “Using the Default-Setting Mode.”
change the printer’s default settings. For more information,
see “Using the Default-Setting Mode.”
Quiet mode = Font + Condensed
Turns on the printer’s quiet mode, which lowers the noise
level during printing. For more information, see “Using Quiet
Mode.”
level during printing. For more information, see “Using Quiet
Mode.”
Reset buffer = Condensed + Tear Off/Bin
Resets the printer to its factory settings.
Using the Default-Setting Mode
The default settings control many printer functions. While
you can often set these functions through your software or
printer driver, you may sometimes need to change a default
setting from the printer’s control panel using the default-
setting mode.
you can often set these functions through your software or
printer driver, you may sometimes need to change a default
setting from the printer’s control panel using the default-
setting mode.
For a detailed description of the settings you can change in the
default-settings mode, see the next section. For instructions on
changing the settings, see “Changing the default settings.”
default-settings mode, see the next section. For instructions on
changing the settings, see “Changing the default settings.”
Default-setting Mode Options
This section describes the options and settings available in the
default-setting mode. Use the table below for quick reference
when changing default settings. The options are explained in
more detail after the table.
default-setting mode. Use the table below for quick reference
when changing default settings. The options are explained in
more detail after the table.
* Default setting
Option
Settings
Page length for
tractor
tractor
3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11*, 70/6, 12, 14, 17
inches
inches
Skip-over-perforation
On, Off*
Auto tear off
On, Off*
Auto line feed
On, Off*
Print direction
Auto, Bi-d*, Uni-d
I/F (interface) mode
Auto*, Parallel I/F, Option I/F
Auto I/F (interface)
wait time
wait time
10 seconds*, 30 seconds
Software
ESC/P 2*, IBM 2390 Plus
Character table
Standard model:
Italic, PC437*, PC850, PC860, PC863,
PC865, PC861, BRASCII, Abicomp,
ISO Latin 1, Roman 8
All other models:
Italic, PC437, PC437 Greek, PC850,
PC852, PC853, PC855, PC857, PC864,
PC866, PC869, ISO Latin 1T,
ISO 8859-7, MAZOWIA, Code MJK, Bulgaria,
Estonia, PC774, ISO 8859-2, PC866 LAT.
Italic, PC437*, PC850, PC860, PC863,
PC865, PC861, BRASCII, Abicomp,
ISO Latin 1, Roman 8
All other models:
Italic, PC437, PC437 Greek, PC850,
PC852, PC853, PC855, PC857, PC864,
PC866, PC869, ISO Latin 1T,
ISO 8859-7, MAZOWIA, Code MJK, Bulgaria,
Estonia, PC774, ISO 8859-2, PC866 LAT.
International
character set for Italic
table
character set for Italic
table
Italic U.S.A*., Italic France,
Italic Germany, Italic U.K.,
Italic Denmark, Italic Sweden, Italic Italy, Italic
Spain
Italic Germany, Italic U.K.,
Italic Denmark, Italic Sweden, Italic Italy, Italic
Spain
0 slash
On, Off*
High speed draft
On*, Off
Input buffer
On*, Off
Buzzer
On*, Off
Auto CR (IBM 2390
Plus) ***
Plus) ***
On, Off*
AGM (IBM 2390 Plus)
***
***
On, Off*
Font **
OCR-B, Orator, Orator-S, Script C, Roman T*,
Sans Serif H
Sans Serif H