Epson 777 Benutzerhandbuch

Seite von 53
42
Ink Cartridge Safety Instructions
Keep ink cartridges out of the reach of children and do not drink the ink.
Be careful when you handle used ink cartridges; there may be ink remaining around the 
ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your 
eyes, flush them immediately with water.
Do not put your hand inside the printer or touch the cartridge during printing.
Do not move the print head by hand; otherwise you may damage the printer.
Install the ink cartridge immediately after you remove it from its package. Leaving the 
cartridge unpacked for a long time before use may result in reduced print quality.
Do not use an ink cartridge beyond the date printed on the cartridge package. For best 
results, use up the ink cartridges within six months of first installing them.
Store ink cartridges in a cool, dark place.
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at 
room temperature for at least three hours before using it.
Do not shake an ink cartridge; this can cause leakage.
Do not dismantle the ink cartridges or try to refill them. This could result in damage to 
the print head.
Do not touch the green IC chip on the side of the cartridge. This may affect normal 
operation and printing.
In this ink cartridge, the IC chip retains a variety of cartridge related-information, such as 
the amount of ink remaining, so that a cartridge may be removed and reinserted freely. 
However, each time a cartridge is inserted, some ink is consumed because the printer 
automatically performs a reliability check.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust 
and store it in the same environment as the printer. Note that there is a valve in the ink 
supply port, making covers or plugs unnecessary, but care is needed to prevent the ink 
from staining items that the cartridge touches. Do not touch the ink cartridge ink supply 
port or surrounding area.
Before transporting the printer, make sure the print head is capped in the far right 
position and the ink cartridges are in place.