Epson 785EPX Produktdatenblatt

EPSON Stylus Photo 785EPX

4/01

EPSON Stylus Photo 785EPX

 - 5

1. Turn on the printer.

2. Lower the printer’s output tray and open the cover.

3. Lift up the two ink cartridge clamps.

Install both ink cartridges, and leave them installed for 
all types of printing, or the printer won’t work.

Keep ink cartridges out of the reach of children and do 

not drink the ink. If ink gets on your hands, wash them 
thoroughly with soap and water. If ink gets in your 
eyes, flush them thoroughly with water.

4. Unwrap the ink cartridges, then remove only the yellow 

part of the tape seal on top. Don’t pull off the blue part.

5. Tilt each cartridge toward you slightly as you lower it. Make 

sure the tabs rest on the hooks as shown.

Don’t place the cartridges under the hooks; you may 
damage the clamp when you close it.

6. Lower the clamps so they snap shut.

7. Press the 

 

e ink replacement button and close the printer 

cover.

Ink charging takes about two minutes. You will see the 
lights flash and hear the printer make noise. Don’t turn off 
the printer during this process or you’ll waste ink.

Never turn off the printer when the green Processing 
light is flashing, unless the printer hasn’t moved or 
made any noise for more than 5 minutes.

black cartridge

color cartridge