Epson R220 Betriebsanweisung

Problems and Solutions

■

Make sure the printable side of the paper is face up. It’s usually brighter or 
whiter.

■

The ink cartridges may need replacing; see page 33 for instructions.

■

Run the Print Head Alignment utility; see page 39 for instructions. 

■

Make sure you load paper with the printable 
side face up. The printable side is usually the 
brighter or whiter side of the paper. 

■

Make sure your paper isn’t damp or curled, 
or loaded face down (the printable side 
should be face up). If it’s damp or curled, 
reload a new stack of paper.

■

When printing on special paper, check the instructions in the paper package. 
You may need to use an included support sheet or load your paper one sheet at 
a time.

■

Use Epson papers to ensure proper saturation and absorption of genuine 
Epson inks. 

■

Make sure your paper meets the specifications listed in the on-screen Reference 
Guide. 

■

Run the Print Head Alignment utility; see page 39 for instructions.

■

Remove each sheet from the output tray after printing, especially when you’re 
printing on transparencies.

■

The print head nozzles may need cleaning; 
see page 31 for instructions. 

■

The ink cartridges may be old or low on ink. 
To replace an ink cartridge, see page 33. 

■

Make sure the paper Type (Windows) Media 
Type (Macintosh) setting matches the paper 
you loaded; see page 17 for guidelines.

R220.book  Page 49  Sunday, August 7, 2005  3:41 PM