Epson 1810P Produktdatenblatt
PowerLite 1810p/1815p
3/07
PowerLite 1810p/1815p
-
17
you first connect the projector. Disregard this message.
Your AirPort network and base station names may be different. To
check or change your AirPort network name, start the AirPort Admin
utility, select your base station, and click Configure. Click Show All
Settings
check or change your AirPort network name, start the AirPort Admin
utility, select your base station, and click Configure. Click Show All
Settings
, then make any changes you want on the AirPort tab.
If you’re connecting to your projector in static IP mode, deselect the
Distribute IP addresses
Distribute IP addresses
checkbox. Make sure your projector’s
gateway address is identical to the base station’s IP address, and the
first three segments of the projector’s IP address are identical to the
first three segments of the base station’s IP address.
first three segments of the projector’s IP address are identical to the
first three segments of the base station’s IP address.
Projecting Over a Network
Once you’ve started EasyMP and set up your projector and
computer in either Ad Hoc (Quick) mode or Access Point
(Advanced) mode, follow these steps to start NS Connection
and project over the network.
computer in either Ad Hoc (Quick) mode or Access Point
(Advanced) mode, follow these steps to start NS Connection
and project over the network.
1. Make sure you’ve set up your projector.
2. Windows: Select
EMP NS Connection
from the Start
menu.
Mac OS X: Double-click the
EMP NS Connection
icon in
your Applications folder.
3. The first time you start NS Connection, you see this dialog
box. Choose Quick Connection Mode and click
OK
.
4. If you see a message asking you to disable the firewall make
an exception for the projector and allow projection. You see
the screen below. (If you have previously started NS
Connection, this may be the first screen you see.)
the screen below. (If you have previously started NS
Connection, this may be the first screen you see.)
If the connection is working properly, you see your projector
listed. If you don’t see your projector listed, see “Solving
Connection Problems” on page 18. If you have additional
Epson projectors on the network, they are also listed along
with their status.
listed. If you don’t see your projector listed, see “Solving
Connection Problems” on page 18. If you have additional
Epson projectors on the network, they are also listed along
with their status.
5. Once the name of your projector appears, select it and click
Connect
. If more than one projector is listed, you can select
additional ones and connect to them (up to four) at the same
time.
time.
If the selected projector is already being used by another
person, you can still connect to it (unless it is “locked”);
doing so automatically disconnects the other user. If a
projector is locked, you won’t be able to connect to it when
it is in use.
person, you can still connect to it (unless it is “locked”);
doing so automatically disconnects the other user. If a
projector is locked, you won’t be able to connect to it when
it is in use.
6. If you set up the projector to prompt you for a keyword
before connecting, you see a screen like this one:
Type in the four-digit number displayed on the EasyMP
Network screen and click
Network screen and click
OK
.
Select projector
Enter keyword