Epson 1810P Produktdatenblatt
PowerLite 1810p/1815p
3/07
PowerLite 1810p/1815p
-
23
Controlling Your Projectors
The control buttons in the upper-right let you turn the
projector on and off and select video sources. (Hold the mouse
pointer over a button to see a description of its meaning.) Make
sure you’ve selected the projector you want to operate (with the
mouse pointer) before clicking one of the buttons.
projector on and off and select video sources. (Hold the mouse
pointer over a button to see a description of its meaning.) Make
sure you’ve selected the projector you want to operate (with the
mouse pointer) before clicking one of the buttons.
Configuring the Monitoring Interval
If you need to have the most current status information about
your projectors, click the
your projectors, click the
Refresh
button in EMP Monitor.
To select how often EMP Monitor checks the status of
projectors, follow the steps below:
projectors, follow the steps below:
1. From the Tool menu, select
Environment Setup
. You see
this screen:
2. Enter the desired Update interval and click
OK
.
Note: If you want EMP Monitor to run whenever you start your
computer, click Register at startup.
computer, click Register at startup.
Understanding the Notification Messages
If a projector experiences a problem, EMP Monitor sends an e-
mail message to each of the addresses you entered in the Set
mail notification function window. The subject line of the
message includes the projector’s display name, shown in EMP
Monitor, and the warning/error. The body of the message
contains the projector’s display name in EMP Monitor and the
error/warning message. When the problem has been fixed, EMP
Monitor sends a message indicating the problem has been
resolved.
mail message to each of the addresses you entered in the Set
mail notification function window. The subject line of the
message includes the projector’s display name, shown in EMP
Monitor, and the warning/error. The body of the message
contains the projector’s display name in EMP Monitor and the
error/warning message. When the problem has been fixed, EMP
Monitor sends a message indicating the problem has been
resolved.
Note: If a projector develops a critical problem, it may not be possible
for it to report the error.
for it to report the error.
Checking Projector Status
If your projector isn’t working correctly, first turn it off, wait for
it to cool (the
it to cool (the
Power
light stops flashing orange), and unplug it.
Then plug the power cord back in and turn on the projector. If
this doesn’t solve the problem, check the lights on top of the
projector.
this doesn’t solve the problem, check the lights on top of the
projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
The following table describes the projector’s status lights.
Control buttons
Status lights
Light
Status
Description
Orange
The projector is in sleep or standby
mode. You can unplug it or press the
mode. You can unplug it or press the
P
Power
button to turn it on.
Flashing
green
green
The projector is warming up. Wait for the
image to appear.
image to appear.
Green
The projector is operating normally.
Temperature light
Lamp light
Power light