Epson 1810P Benutzerhandbuch

PowerLite 1810p/1815p

3/08

PowerLite 1810p/1815p 

- 

19

1. Click 

Manual search

 on the NS Connection screen.

2. Enter the IP address or the projector name for the projector 

you want to connect to, and click 

OK

.

The Projector is added to the EMP NS Connection screen.

If the search fails to find a projector with the specified IP 
address, the searching icon turns into a question mark. If this 
happens, run EasyMP on your projector (see page 10) to 
check the projector’s IP address, then repeat this step.

3. Click the projector you want to connect to and click the 

Connect

 button. If more than one projector is listed, you 

can select additional projectors and connect to them at the 
same time.

4. If you are prompted for a keyword, enter the four-digit 

number displayed on the EasyMP Network screen and click 

OK

.

The computer’s image is transmitted to the projector and 
appears on the screen. See page 18 for details about using the 
floating control bar on your computer desktop.

If you don’t see your network adapter’s IP address, allow a 
minute for it to appear. If your access point or AirPort base 
station uses DHCP (

Distribute IP

 

addresses

 setting is enabled 

for AirPort), sometimes it takes a minute for the server to pick 
up the IP address.

Once you’ve selected the IP address for your network adapter, 
you won’t see the Switch network dialog box when you start NS 
Connection. If you want to change to a different network 
adapter, click 

Extension

 on the EMP NS Connection dialog 

box, then click 

Switch

 

LAN

 on the extension dialog box.

If a projector is in use and is “locked,” you won’t be able to 
select it. To lock the projector from connection by other users 
while you are connected, click the 

Disable interrupt 

connection

 checkbox. De-select it to disable the lock and allow 

connection by other users.

Configure

Show All Settings

The software included with your projector lets you monitor and 
control your projectors from a remote computer.
❏ Use EMP Monitor (available for Windows only) to see your 

projectors’ status, switch image sources, and control basic 
settings.

❏ Use the mail notification function to receive e-mail alerts 

about possible problems.

You can also use NS Connection to register up to 16 projectors 
as a group. This allows you to provide quick and easy access to 
these projectors from other computers.

To use the software to manage your projectors, you must first 
install EMP Monitor. If you plan to create projector groups, 
also install EMP NS Connection. Then connect and configure 
each projector you want to monitor. You can connect the 
projector wirelessly in Access Point mode (see page 13) or over a 
wired network as described here.

EMP Monitor lets you use a remote computer to manage your 
projectors, whether connected wirelessly or over a wired 
network. It lets you easily turn the projectors on or off (together 
or individually), switch image sources, and check their status.

Before using EMP Monitor, make sure you’ve installed the 
software (available for Windows only). The computer you’re 
using to monitor the projector should already be connected to 
your network.

To start EMP Monitor,

 

click

 Start > Programs 

or

 All 

Programs > EPSON Projector > EMP Monitor

.