Epson 61p Benutzerhandbuch

If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 30 for instructions.

If more than one device is connected to the projector, select the 
correct source after projection starts by pressing the 

Source

 

Search

 

button on the projector or the 

Comp1

 or 

Comp2

 button on the 

If your computer provides video output through BNC connectors, 
follow these instructions to connect the projector to your computer 
with an optional VGA-5BNC cable. Before you start, make sure your 
computer and the projector are turned off.

1. Disconnect the monitor cable from your computer.

2. Connect the cable’s VGA connector to the projector’s 

Computer1/Component Video1 

or the 

Computer2/Component Video2

 port. If you are going to 

connect your computer monitor to the projector for simultaneous 
display, use the 

Computer1/Component Video1

 port.

3. Connect the BNC connectors to your computer’s BNC ports. 

4. If you want to view the display simultaneously on your computer 

monitor and the projector screen, see “Connecting an External 
Monitor” on page 20.

5. Tighten the screws on the VGA connector.

VGA-5BNC cable